top of page


IP23 interior/industry fitting

UtiLine - powerful IP23 interior and industry fitting for various application areas



The body is made of extruded aluminium, as standard delivered in an aluminium finish. White painted, RAL 9010, versions on request. End caps in ABS plastics. The changeable LED unit makes the cover with a diffuser in transparent acrylics (PMMA).


Application areas

Industry facilities, warehouses, department stores, exhibition halls etc.


Control gear

The electronic LED driver is integrated. On request the DALI versions can be programmed to CLO.



3000K, Wago and length 1906 mm 153W versions are available on request.



Direct in ceiling or on cable bridge, by 2 stainless steel fixing brackets, included with the fitting. Due to a mounting slot in the body the brackets can be fixed to the fitting by “click-in”, along the complete length of the fitting. Horisontal wire fixing via the standard mounting brackets.



Cable entry via 2 cable sealings in each end cap, or in center from the top of the fitting (not for the 958mm version). Through wiring facility as standard with 5×2.5mm², DALI 7×2.5mm² push-in terminal block in each end of the fitting.

bottom of page